{"product_id":"dg-49260-xpj-1682sr-main-board","title":"Main Board DG-49260 XPJ-1682SR | Original Mutoh Printer Part","description":"\u003cp\u003eThe \u003cstrong\u003eMutoh DG-49260 Main Board\u003c\/strong\u003e is an original Mutoh replacement part and the central control board of the printer. It processes incoming print data and drives every subsystem, from carriage and media movement to ink delivery and the heaters.\u003c\/p\u003e\n\u003ch3\u003eKey Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e DG-49260\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand New\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Mutoh® (Original Product)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Main Board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e XPJ-1682SR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Receives and processes print data, then controls carriage movement, media feed, printhead firing and the ink system through the CR board, junction board and head cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Assurance:\u003c\/strong\u003e Secure checkout and fast worldwide shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated Error Codes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard and memory — main board is the only cause listed:\u003c\/strong\u003e the full E016 range of CPU errors (interrupt, TLB, address, bus, system call, break point, coprocessor, overflow, trap, floating point, watchdog and abort), plus E097 (NVRAM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor and carriage:\u003c\/strong\u003e E065, E066, E067, E068, E069, E070, E071, E072, E073, E074 and E092\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead:\u003c\/strong\u003e E190 and E191 (head transistor thermistor 1 and 2) — the XPJ-1682SR carries two heads, so both apply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication:\u003c\/strong\u003e E079 (board communication), where the serial cable and heater control board are listed first\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated Symptoms\u003c\/h3\u003e\n\u003cp\u003eThe main board is listed in the Mutoh service manual as a possible cause of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe printer not printing at all, or not printing continuously\u003c\/li\u003e\n\u003cli\u003eExtra media fed after a print\u003c\/li\u003e\n\u003cli\u003eA page printed entirely black\u003c\/li\u003e\n\u003cli\u003eBlurred borders or unevenly printed images\u003c\/li\u003e\n\u003cli\u003ePrinting in the wrong position, or part of the data missing\u003c\/li\u003e\n\u003cli\u003eUnwanted dots (satellites) on the print\u003c\/li\u003e\n\u003cli\u003eCleaning cycles that fail to clear clogged nozzles\u003c\/li\u003e\n\u003cli\u003eAbnormal noise when media is drawn onto the platen\u003c\/li\u003e\n\u003cli\u003eThe printer not powering on, the LCD malfunctioning, or the system hanging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA faint vibration while the printer sits idle — the manual likens it to tinnitus — is normal and needs no action. Only a louder or different noise points to a board.\u003c\/p\u003e\n\u003ch3\u003eCheck the Firmware First\u003c\/h3\u003e\n\u003cp\u003eFor three faults the manual points at firmware or the print file before the board:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinter not printing continuously\u003c\/strong\u003e — incorrect firmware on the main side is listed ahead of the main board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtra media fed after a print\u003c\/strong\u003e — test with a different file first. If other data prints correctly, the fault is the damaged file, not the printer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarbled data or printing\u003c\/strong\u003e — firmware is the \u003cem\u003eonly\u003c\/em\u003e cause listed; the main board is not named at all\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm your firmware version before ordering a board. If the cause is firmware, a new board will not fix it.\u003c\/p\u003e\n\u003ch3\u003eBefore You Order\u003c\/h3\u003e\n\u003cp\u003eOn the motor and carriage codes the main board is listed \u003cem\u003elast\u003c\/em\u003e, behind the timing fence, CR motor, PF motor and CR board — all of which are cheaper. The E016 range and E097 are the codes where the main board stands alone. Send us your model and serial number and we will talk it through before you buy.\u003c\/p\u003e","brand":"Mutoh","offers":[{"title":"Default Title","offer_id":56025939312808,"sku":"DG-49260","price":1755.0,"currency_code":"USD","in_stock":true}],"url":"https:\/\/houseofparts.net\/products\/dg-49260-xpj-1682sr-main-board","provider":"House of Parts","version":"1.0","type":"link"}