Main Board DG-49260 XPJ-1682SR | Original Mutoh Printer Part

The Mutoh DG-49260 Main Board is an original Mutoh replacement part and the central control board of the printer. It processes incoming print data and drives every subsystem, from carriage and media movement to ink delivery and the heaters.

Key Details

• SKU: DG-49260
• Condition: Brand New
• Brand: Mutoh® (Original Product)
• Part Type: Main Board
• Compatible Models: XPJ-1682SR
• Function: Receives and processes print data, then controls carriage movement, media feed, printhead firing and the ink system through the CR board, junction board and head cables.
• Service Assurance: Secure checkout and fast worldwide shipping

Related Error Codes

• Board and memory — main board is the only cause listed: the full E016 range of CPU errors (interrupt, TLB, address, bus, system call, break point, coprocessor, overflow, trap, floating point, watchdog and abort), plus E097 (NVRAM)
• Motor and carriage: E065, E066, E067, E068, E069, E070, E071, E072, E073, E074 and E092
• Head: E190 and E191 (head transistor thermistor 1 and 2) — the XPJ-1682SR carries two heads, so both apply
• Communication: E079 (board communication), where the serial cable and heater control board are listed first

Related Symptoms

The main board is listed in the Mutoh service manual as a possible cause of:

• The printer not printing at all, or not printing continuously
• Extra media fed after a print
• A page printed entirely black
• Blurred borders or unevenly printed images
• Printing in the wrong position, or part of the data missing
• Unwanted dots (satellites) on the print
• Cleaning cycles that fail to clear clogged nozzles
• Abnormal noise when media is drawn onto the platen
• The printer not powering on, the LCD malfunctioning, or the system hanging

A faint vibration while the printer sits idle — the manual likens it to tinnitus — is normal and needs no action. Only a louder or different noise points to a board.

Check the Firmware First

For three faults the manual points at firmware or the print file before the board:

• Printer not printing continuously — incorrect firmware on the main side is listed ahead of the main board
• Extra media fed after a print — test with a different file first. If other data prints correctly, the fault is the damaged file, not the printer
• Garbled data or printing — firmware is the only cause listed; the main board is not named at all

Confirm your firmware version before ordering a board. If the cause is firmware, a new board will not fix it.

Before You Order

On the motor and carriage codes the main board is listed last, behind the timing fence, CR motor, PF motor and CR board — all of which are cheaper. The E016 range and E097 are the codes where the main board stands alone. Send us your model and serial number and we will talk it through before you buy.